Home > Amana > Saw Blades > Solid Surface Saw Blades > Solid Surface Ditec >

[AMANA DT12841-30] Carbide Tipped Ditec Solid Surface 12 Inch Dia x 84T S-TCG, 0 Deg, 30mm Bore
Amana DT12841-30 12"/84T DITEC-2000 TIPS 30MM
 
Your Price: $293.18


Availability: Usually ships out on the same or next business day
Product Code: AMANA-DT12841-30
Qty:

  
Product Info
 

Description

    These blades are designed for cutting plastic laminate, Plexiglas®, and solid surface materials such as Dupont Corian®, Wilsonart®, Gibraltar® and Fountainhead®. The DITEC carbide tips are ground in a triple chip geometry unique to this blade, and leave a swirl-free cut in solid surface materials.

    The thick, stable plate reduces vibration that degrades the cut and shortens tool life. The blade is suitable for a variety of saw configurations. Its 0° hook angle virtually eliminates self-feeding when used with a radial arm saw.

    Exclusive DITEC™ Carbide Tips

    Higher Reliability & Lower Maintenance

    Low Noise Level

    Laser Cut Saw Bodies

    Excellent Cutting Quality

    Instructions for grinding:

    • For maintenance grinding, use fine grit (D400 to D600) diamond wheels. To match the factory grind, use a slower than normal feed rate.
    • Damaged teeth can be replaced by any grade of carbide tooth. Replacing of a large number of teeth will, of course, shorten the life of the saw blade.
    • Since the carbide in the DITEC™ is harder than other carbides, it is critical that you protect them from “thermal shock” if an adjacent tooth is replaced. Heat absorbed during the brazing process will seriously degrade the DITEC™ carbide.

Contents

    (1) Amana DT12841-30
CLICK image to zoom in

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Amana > Saw Blades > Solid Surface Saw Blades > Solid Surface Ditec
-->