Home > Amana >

[AMANA DT120T14-20] ADJ. SCORING 120MM/24T 20MM
Amana DT120T14-20 ADJ. SCORING 120MM/24T 20MM
 
Your Price: $142.46


Availability: Usually ships out on the same or next business day
Product Code: AMANA-DT120T14-20
Qty:

  
Product Info
 

Description

    Used on panel saws or sliding table saws with separate scoring units for chip-free cuts on both sides of the material. Adjustable scoring sets consist of two 12-tooth saw blades with shims to adjust the kerf width (2.8mm to 3.6mm). Used in combination with our industrial saw blades with standard kerf (example #612721, #DT12721, etc.).

    Exclusive DITEC™ Carbide Tips

    Higher Reliability & Lower Maintenance

    Low Noise Level

    Laser Cut Saw Bodies

    Excellent Cutting Quality

    Instructions for grinding:

    • For maintenance grinding, use fine grit (D400 to D600) diamond wheels. To match the factory grind, use a slower than normal feed rate.
    • Damaged teeth can be replaced by any grade of carbide tooth. Replacing of a large number of teeth will, of course, shorten the life of the saw blade.
    • Since the carbide in the DITEC™ is harder than other carbides, it is critical that you protect them from “thermal shock” if an adjacent tooth is replaced. Heat absorbed during the brazing process will seriously degrade the DITEC™ carbide.

Contents

    (1) Amana DT120T14-20

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Amana
-->