 |
Specifications:Item Number: LU90M010
Carbide Tipped
Diameter: 10"
Teeth: 100 TCG
Arbor Size: 5/8"
Kerf Width: .110"
Plate Thickness: .087"
Hook Angle: 5û
Recommended Use: Non-Ferrous Metal DescriptionThis blade produces a smooth, burr-free finish when cutting thin aluminum, brass and other non-ferrous metal extrusions.high tooth count with a 5 degree hook angle allows the teeth to slice efficiently through the material without binding.requirements on the cutting edge greatly differ with non-ferrous metals than with cutting wood.this in mind, Freud formulated a special carbide with high impact strength for this blade.recommends use of a liquid lubricant when cutting non-ferrous metals.can be accomplished with a spray of WD-40 or other similar type of lubricant every 4 or 5 cuts.sticks are NOT RECOMMENDED. Application: Cutting Thin Aluminum And Other Non-Ferrous Metals Contents
CLICK image to zoom in
|
|
|
